Leo Bell Leo Bell's Profile Page

Leo Bell Leo Bell

0 Course Enrolled • 0 Course Completed

Biography

JN0-336시험유형, JN0-336자격증참고서

그 외, DumpTOP JN0-336 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1WRyOVUVExZTf2pnnZA2DxwX5lURqXhCU

DumpTOP의 덤프선택으로Juniper JN0-336인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.

DumpTOP선택으로Juniper JN0-336시험을 패스하도록 도와드리겠습니다. 우선 우리DumpTOP 사이트에서Juniper JN0-336관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의DumpTOP에 신뢰감을 느끼게 됩니다. DumpTOP에서 제공하는Juniper JN0-336덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.

>> JN0-336시험유형 <<

JN0-336시험유형 최신 덤프문제보기

Juniper인증 JN0-336시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. DumpTOP의 Juniper인증 JN0-336덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.

최신 JNCIS-SEC JN0-336 무료샘플문제 (Q55-Q60):

질문 # 55
Which IDP action is also referred to as a silent discard?

A. ignore connection
B. close client and server
C. no action
D. drop packet

정답：D

설명：
The correct answer is D. drop packet. In IDP terminology, a silent discard means the offending packet is discarded without sending reset packets or other connection-closing signals back to the endpoints. Juniper defines the Drop Packet IDP action as dropping a matching packet before it reaches its destination while not closing the connection. That is the closest and correct IDP action for "silent discard" in the listed choices.
Option A, no action, is wrong because it does not discard anything; Juniper describes No Action as taking no enforcement action, typically used when the administrator only wants logging. Option B, close client and server, is wrong because that action actively closes the session by sending TCP RST packets to both sides, which is explicitly not silent. Option C, ignore connection, is wrong because it stops further IDP scanning for the rest of the connection; it does not discard the packet. Juniper distinguishes these actions clearly: drop packet discards the offending packet, drop connection blocks the whole connection, and close actions send reset packets. Reference topics: IDP actions, drop packet, close client and server, ignore connection, silent discard behavior.

질문 # 56
You have configured a new site-to-site VPN tunnel. The exhibit shows the security IPsec statistics output for the specific tunnel index from one of the tunnel-end devices.

Which two statements are correct in this scenario? (Choose two.)

A. The ESP configuration is not set up correctly.
B. The far-end tunnel device is rebooting.
C. AH is incorrectly configured.
D. No traffic passes through this tunnel.

정답：A,D

설명：
The correct answers are C and D. The exhibit shows ESP encrypted bytes = 0, ESP decrypted bytes = 0, encrypted packets = 0, and decrypted packets = 0. That means no traffic is successfully passing through the IPsec tunnel. Juniper's show security ipsec statistics command displays ESP encrypted/decrypted packet and byte counters, so zero values on these counters indicate that the tunnel is not successfully carrying protected ESP traffic.
Option C is also correct because the output shows ESP authentication failures and ESP decryption failures.
Since ESP is the IPsec protocol responsible for encrypted payload handling, failures in ESP authentication
/decryption point to an ESP/IPsec Phase 2 mismatch or incorrect configuration, such as mismatched authentication algorithm, encryption algorithm, keys, proposal parameters, or incompatible negotiated SA settings. Juniper's IPsec overview explains that Phase 2 negotiates the IPsec SA used to authenticate traffic flowing through the tunnel, so ESP-related failures belong to the IPsec/ESP configuration path rather than AH.
Option A is wrong because the AH counters and AH authentication failures are zero; the evidence is not pointing to AH. Option B is unsupported because the output does not show peer reboot behavior. Reference topics: IPsec VPN, ESP statistics, Phase 2/IPsec SA negotiation, ESP authentication failures, ESP decryption failures.

질문 # 57
While working on an SRX firewall, you execute the show security policies policy-name <name> detail command.
Which function does this command accomplish?

A. It identifies the different custom policies enabled.
B. It shows the system log files for the local SRX Series device.
C. It shows policy counters for a configured policy.
D. It displays details about the default security policy.

정답：C

설명：
The function that the show security policies policy-name <name> detail command accomplishes is showing policy counters for a configured policy. Policy counters are statistics that indicate how many times a policy has been matched by traffic and what actions have been taken by the policy. Policy counters can help you monitor and troubleshoot the performance and effectiveness of your security policies. The show security policies policy-name <name> detail command displays detailed information about a specific policy, such as its source zone, destination zone, description, state, hit count, byte count, packet count, action count, and session count.
Reference: = show security policies, show security policies information, [SRX] How to troubleshoot a security policy that is not passing data

질문 # 58
Which two devices would you use for DDoS protection with Policy Enforcer? (Choose two.)

A. MX
B. QFX
C. vMX
D. vQFX

정답：A,C

설명：
The MX and vMX devices can be used for DDoS protection with Policy Enforcer. Policy Enforcer is a Juniper Networks solution that provides real-time protection from DDoS attacks. It can be used to detect and block malicious traffic, and also provides granular control over user access and policy enforcement.
The MX and vMX devices are well-suited for use with Policy Enforcer due to their high-performance hardware and advanced security features.

질문 # 59
Which two statements are correct about Juniper ATP Cloud malware analysis? (Choose two.)

A. If a match exists in cache, that threat score is sent to the SRX Series device and the analysis stops.
B. If a match exists in cache, that threat score is sent to the SRX Series device and the analysis continues.
C. If no match exists in cache, the first analysis feature to generate a threat score is transmitted to the SRX Series device.
D. If no match exists in cache, the remaining analysis features are processed with the cumulative threat score transmitted to the SRX Series device.

정답：A,D

설명：
The correct answers are A and C. Juniper ATP Cloud uses a malware-analysis pipeline. When a file is submitted, the first step is a cache lookup based on the file hash. Juniper explains that if the file has already been analyzed, the stored verdict is returned to the SRX Series Firewall and there is no need to re-analyze the file. That directly supports C and eliminates B, because analysis does not continue when a cached verdict is found.
If the cache lookup does not return a verdict, the remaining ATP Cloud analysis techniques are used. Juniper describes the pipeline model in which each analysis technique creates a verdict number, and those verdicts are combined into a final verdict score from 0 to 10. That final threat score is what the SRX compares against ATP Cloud policy settings to permit or block the session.
Option D is wrong because ATP Cloud does not simply return the first score generated by any one feature.
The expected behavior is cumulative/final scoring across the remaining analysis pipeline. Reference topics:
Juniper ATP Cloud, malware analysis pipeline, cache lookup, verdict number, threat score, SRX enforcement.

질문 # 60
......

DumpTOP 는 전문적으로 Juniper전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리DumpTOP의 JN0-336제품이 제일 안전하고 최신이라고 합니다. DumpTOP의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. DumpTOP 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.

JN0-336자격증참고서: https://www.dumptop.com/Juniper/JN0-336-dump.html

경쟁율이 치열한 IT시대에 JN0-336시험을 패스하여 자격증을 취득함으로 IT업계 관련 직종에 종사하고자 하시는 분들께는 아주 큰 가산점이 될수 있고 자신만의 위치를 보장할수 있으며 더욱이는 한층 업된 삶을 누릴수 있을수도 있습니다, Juniper JN0-336 인증시험 최신버전덤프만 마련하시면Juniper JN0-336시험패스는 바로 눈앞에 있습니다, Juniper JN0-336시험유형 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다, Juniper JN0-336덤프구매에 관심이 있는데 선뜻 구매결정을 하지 못하는 분이라면 사이트에 있는 demo를 다운받아 보시면Juniper JN0-336시험패스에 믿음이 생길것입니다, JN0-336자격증자료는 최근 출제된 실제시험문제를 바탕으로 만들어진 공부자료입니다.

짧게 회상을 마친 한성댁은 긴 날숨과 함께 쓴 감정을 몰아냈다.언제 너희 집 한번 가야겠다, 지연과 민호는 지체 없이 최면치료실 안으로 들어갔다, 경쟁율이 치열한 IT시대에 JN0-336시험을 패스하여 자격증을 취득함으로 IT업계 관련 직종에 종사하고자JN0-336하시는 분들께는 아주 큰 가산점이 될수 있고 자신만의 위치를 보장할수 있으며 더욱이는 한층 업된 삶을 누릴수 있을수도 있습니다.

최신버전 JN0-336시험유형 완벽한 덤프 최신버전

Juniper JN0-336 인증시험 최신버전덤프만 마련하시면Juniper JN0-336시험패스는 바로 눈앞에 있습니다, 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다, Juniper JN0-336덤프구매에 관심이 있는데 선뜻 구매결정을 하지 못하는 분이라면 사이트에 있는 demo를 다운받아 보시면Juniper JN0-336시험패스에 믿음이 생길것입니다.

JN0-336자격증자료는 최근 출제된 실제시험문제를 바탕으로 만들어진 공부자료입니다.

그리고 DumpTOP JN0-336 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1WRyOVUVExZTf2pnnZA2DxwX5lURqXhCU

Sign up to receive our latest updates

Get in touch

Need some help?

Popular subjects

Need some help?

Designed by ❤ dezainin.com

Leo Bell Leo Bell

Biography

Sign up to receive our latest updates

Get in touch

Need some help?

Popular subjects

Need some help?

Login with your site account

Register a new account

Search